Dialogic 4000 SERIES Manuel d'utilisateur télécharger pdf (Page 37)

Dialogic® Diva® SIPcontrol™ Configuration

Page 37

Enhanced

You can configure the following parameters in the Enhanced section when you create or modify a SIP Peer:

Default peer for

received SIP calls

Enable this option if the selected peer type should be used as the default peer. Calls from

unconfigured SIP peers will be assigned to this peer, and therefore are handled with these settings.

This option can also be changed via the Default Peer option on the main SIPcontrol page.

Note: When a peer is selected as the default, the previously selected default peer is automatically

unselected.

Display name to: Enter the name to be sent in the "To" header of the INVITE message on calls from the PSTN to SIP.

Display name

from:

Enter the name that is to be sent in the "From" header of the INVITE message on calls from the

PSTN to SIP. To send the calling party number include an asterisk (*) in the display name. For

instance, if the display name is "Dialogic *" and the calling number is 123, then the remote side

receives "Dialogic 123". To include an asterisk in the display name, enter "\*". To include a

backslash enter "\\".

User name to: You can enter a user name in front of the host name, e.g., thomas@dialogic.com. The user name

is needed for the default route when no called party number is transmitted, e.g., for Diva Analog

Media Boards.

If a call from SIP does not contain a user name, the name entered here is transmitted to the

receiver as the calling party number. This applies to all references to PSTN in this section. (The

opposite side can either be PSTN or SIP.)

User name from: Enter the user name that is added to the SIP address when a number from the PSTN is suppressed.

You can also enter the complete SIP address consisting of <username>@<local-IP/hostname>.

If a call from SIP does not contain a user name, the name entered here is transmitted to the PSTN

as the called party number.

Gateway prefix: You can configure this parameter only if you selected e-phone as Peer type in the Edit SIP Peer

Configuration window.

This prefix is added at the beginning of the address in the "Reply-To" and "Contact" headers,

which are copies of the "From" address. If this string is not empty, the parameter "phone-context"

will be added in both headers.

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 167 168

Pas de commentaire

Dialogic 4000 SERIES Manuel d'utilisateur Page 37