Dialogic 4000 SERIES Manuel d'utilisateur télécharger pdf (Page 124)

Dialogic

4000 Media Gateway Series Reference Guide

Page 124

Leave the remaining parameters at their default values.

Click OK to save the settings and close the window.

• To configure the controller that is connected to the PBX later in the configuration, click Details at the

right of the respective controller, and configure the following parameters:

• Name: Enter a unique name for this controller.

• Address map inbound: Select the inbound address map that you configured for access from the PBX.

Address map outbound: Select the outbound address map that you configured for access to the PBX.

Under Address Normalization, configure the following parameters:

• Dialplan: Select the dialplan you configured for the PSTN.

• Number format (outbound): Select National number from the dropdown menu.

• Encoding (outbound): Select Use prefixes from the dropdown menu.

•Activate the Internal Interface option. This option must be activated, because this interface connects

to internal devices only. (It does not directly connected to the PSTN.)

Leave the remaining parameters at their default values.

Click OK to save the settings and close the window.

11. Under Network Interfaces, enable your Ethernet adapter, and set the SIP listen ports to 9803.

1 2 ... 119 120 121 122 123 124 125 126 127 128 129 ... 167 168

Pas de commentaire

Dialogic 4000 SERIES Manuel d'utilisateur Page 124