Dialogic 4000 SERIES Manuel d'utilisateur télécharger pdf (Page 144)

Dialogic

4000 Media Gateway Series Reference Guide

Page 144

• Create the third route to have all call transfers routed by the Lync Server. To do so, click Add in the

Routing section, and configure the following parameters:

• Name: Enter a unique name to easily identify the route.

• Source: Select the SIP peer configured for the Lync Server as both a source and Master destination.

This causes all calls matching the specified conditions to be routed back to the Lync Server, so it can

handle the routing.

Under Conditions, enter the address of the Lync Server as both an FQDN and an IP address. This condition

will match all transfer requests from the Lync Server.

Note: If the Gateway is connected to a Lync Front End Server Pool instead of a Lync SBA or single Lync

Front End Server, you need to use the FQDN of the pool and IP address of each pool member to match all

transfer requests from the Lync Server.

Click OK to save the settings and close the window.

1 2 ... 139 140 141 142 143 144 145 146 147 148 149 ... 167 168

Pas de commentaire

Dialogic 4000 SERIES Manuel d'utilisateur Page 144