Dialogic 4000 SERIES Manuel d'utilisateur télécharger pdf (Page 136)

Dialogic

4000 Media Gateway Series Reference Guide

Page 136

• Optionally enable Stop on match to have the gateway stop searching for matching rules when all specified

address conditions match all addresses of a call.

Under Called address rules, configure the following parameters:

• Address Condition: Enter the called address condition as shown in the graphic above. This condition

matches all calls to 192.168.212.138, which is the IP address of the FSX ATA.

• Address Result: Enter the called address result as shown in the graphic above, with the FDQN of the

SBA after the @ sign.This address result converts the matched called addresses to a form accepted

by the Lync Server.

Under Calling address rules, configure the following parameters:

• Address Condition: Enter the calling address condition as shown in the graphic above. This condition

matches all calls from 192.168.212.138, which is the IP address of the FXS ATA.

• Address Result: Enter the calling address result as shown in the graphic above, with the FDQN of

the SBA after the @ sign. This address result converts the matched calling addresses to a form accepted

by the Lync Server.

Click OK to save the settings and close the window.

10. Under PSTN Interfaces, configure both Controller 1 and Controller 2 with PSTN-specific settings. The

controller numbers that you configure with PSTN-specific settings needs to correspond to the line numbers

in the Diva Configuration Manager on which you configured the switch type of your PSTN lines.

• To configure PSTN-specific parameters for Controller 1, click Details to the right of the respective

controller, and configure the following parameters:

• Name: Enter a unique name for this controller.

• Dialplan: Select the configured dialplan.

Click OK to save the settings and close the window.

1 2 ... 131 132 133 134 135 136 137 138 139 140 141 ... 167 168

Pas de commentaire

Dialogic 4000 SERIES Manuel d'utilisateur Page 136