Dialogic DMG2030DTI Manuel d'utilisateur télécharger pdf (Page 8)

Configuring the Media Gateway

The last steps required in configuring the media gateway is to configure the dial plan, adjust the advanced

settings, configure the serial protocol (if required), and set up integration with the UC server.

Dialogic has PBX specific configuration files that can be imported into the Media Gateway to ensure that

the custom PBX settings are configured correctly. The Dialogic Media Gateway software available from

Dialogic contains the latest versions of configuration files for the PBXs that they support.

The following configuration steps are required to integrate with the UC server:

1. SIP Parameters

2. CPID Manipulation

3. Inbound VoIP Call Routing

4. Inbound TDM Routing

5. Call Connect Mode for answer supervision

6. Specific PBX Integration instructions available from Dialogic

The PBX integration configuration settings vary depending on the PBX manufacturer, PBX model and

version and integration type. For specific instructions, see the specific Dialogic configuration guide for

the PBX model and integration type.

To manage the media gateway

1. Open your web browser and enter the IP Address of your media gateway.

2. When the login prompt appears, enter the following:

Username: admin

Password: IpodAdmin

SIP

The SIP parameters ensure that the Media Gateway uses the appropriate configuration parameters to

integrate with the UC server SIP PBX (via Gateway) Communications System. Any parameters not listed

below must be set as the default configuration or as recommended by the relative PBX Integration guide

provided by Dialogic.

Navigate to Configure > VoIP > General and ensure the following parameters are configured:

User-Agent

Host and Domain Name: IP Address or FQDN of the UC server

Transport Type: UDP (Match the transport type of UC Port)

Call as Domain Name: No

SIP URI Scheme Enabled: No

Invite Expiration (sec): 120

Server

DNS Server Address: As appropriate for network

Registration Server Address: <Blank>

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 17 18

Pas de commentaire

Dialogic DMG2030DTI Manuel d'utilisateur Page 8