Configuring the Dialogic Media Gateway Configuring the Dialogic Media Gateway
6 Copyright © 2012 ADTRAN, Inc. 6UCSTN0088-4A
• Select Operating Mode: Enter SIP.
• Line Mode: Enter T1 for a T1 digital link and E1 for an E1 digital link.
• Signaling Mode: You can enter either CAS or ISDN depending on the type of digital link.
- If you enter T1 for the line mode and CAS for the signaling mode, you are prompted to select
the Loop Start protocol.
- If you enter ISDN, you are prompted to specify the T1 protocol to be used.
9. Enter restart at the PIMG> prompt.
Accessing the Dialogic Media Gateways Using the Web Interface
To access and begin configuring the media gateway using the Web interface, follow these steps:
1. Open a Web browser, enter the IP address of your media gateway in the address bar, and press the
ENTER key.
2. When the login prompt appears, enter admin in the Username field and IpodAdmin in the Password
field.
Configuring the SIP Parameters
The SIP parameters ensure that the media gateway uses the appropriate configuration parameters to
integrate with NetVanta UC Server. Any parameters not listed below must be left as the provided default
value or set as recommended by the appropriate PBX integration guide provided by Dialogic.
Navigate to Configuration > VoIP > General and ensure the following parameters are configured:
• User-Agent
- Host and Domain Name: Enter the IP address or fully qualified domain name (FQDN) of the
NetVanta UC Server computer in the field.
- Transport Type: Select UDP using the drop-down menu (to match the transport type of
NetVanta UC Server port).
- Call as Domain Name: Select No using the drop-down menu.
- SIP URI Scheme Enabled: Select No using the drop-down menu.
- Invite Expiration (sec): Enter 120 in the field.
• Server
- DNS Server Address: Enter the IP address of the domain naming system (DNS) server used
for the network.
- Registration Server Address: Leave blank.
• TCP/UDP
- UDP/TCP Transport enabled: Select Yes using the drop-down menu.
- TCP/UDP Server Port: Enter 5060 in the field.
- TCP Inactivity Timer (sec): Enter 30 in the field.
• TLS
- TLS Transport Enabled: Select No using the drop-down menu.
• Proxy
- Primary Proxy Server Address: Leave blank.
(12 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels