Dialogic 2000 Series Manuel d'utilisateur télécharger pdf (Page 26)

Configuring the DMG2000 Series for Hybrid Operation Configuring the Dialogic Media Gateway

Configuring the Auto Attendant Inbound TDM Rules

To route the auto attendant identities to the voicemail trunk in the DMG2000 using inbound TDM rules,

follow these steps:

1. Using the menu on the left, navigate to Configure > Routing Table.

2. Select the Inbound TDM Rules radio button.

3. Use the Add Rule button to create an inbound TDM rule for the NetVanta UC Server auto attendants.

4. Configure the Rule Label, Request Type, and Trunk Group of the inbound TDM rule with the values

in the following table:.

5. In the Inbound TDM Rules section, highlight the newly created UC Server AAs rule. The Detailed

Configuration for Inbound TDM Rule: UC Server AAs section will appear.

Table 16. Auto Attendant Inbound TDM Rules for Hybrid Operation

Enable Rule Label Request Type Trunk Group

Yes UC Server AAs Any TdmAll (created in

Configuring the TDM Trunk

Group for Hybrid Operation on

page 19)

1 2 ... 21 22 23 24 25 26 27 28 29 30 31

Pas de commentaire

Dialogic 2000 Series Manuel d'utilisateur Page 26