Dialogic DSI SS7MD Manuel d'utilisateur télécharger pdf (Page 71)

Dialogic

DSI Signaling Server SGW Mode User Manual Issue 5

Example

CNTDS:DATE=2001-10-03,TIME=18:32:21,NTP=Y,OFFSET=+5:30;

EXECUTED

6.5.28 CNTDP – Configuration Time And Date Print

Synopsis

This command is used to print out the system date and time, whether NTP is active and to display the

OFFSET from UTC configured. See the CNTDS command for setting the time and date, UTC OFFSET and

activating NTP.

Syntax

CNTDP;

Prerequisites

None.

Attributes

None.

Example

CNTDP;

Configuration Time and Date

DATE TIME NTP OFFSET

2001-10-03 09:04:02 Y +5:30

6.5.29 CNTOS – Configuration Timeout Value Set

Synopsis

This command is used to change the value of a timer for a particular signaling system.

The user should specify the timer type (TTYPE), the timer itself (TO) and time to which it should be set,

expressed in either seconds (TSEC) or milliseconds (TMSEC).

Note: Some signaling system timer values are not changeable.

See the CNTOP command to verify timer values. See Section 5.3, “Signaling Gateway Timers” on page 46 for

the definition of signaling system specific timers.

Syntax

CNTOS:TTYPE=,TO=,{TSEC=|TMSEC=};

Prerequisites

None

Attributes

CONFIG

Examples

CNTOS:TTYPE=MTP3,TO=7,TSEC=30;

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 175 176

Pas de commentaire

Dialogic DSI SS7MD Manuel d'utilisateur Page 71