Dialogic Brooktrout TR1034 BRI Guide de l'utilisateur télécharger pdf (Page 76)

FAX BOARDS AND FAX DRIVERS INSTALLATION

Configuration Parameters

for T1 RBS Ports

connection between the board and the T1 service:

0_133 = Specifies a length of 0 to 133 feet

133_266 = Specifies a length of 133 to 266 feet

266_399 = Specifies a length of 266 to 399 feet

399_533 = Specifies a length of 399 to 533 feet

533_655 = Specifies a length of 533 to 655 feet

7_5_DB = Specifies a length of negative 7.5 dB

15_DB = Specifies a length of negative 15.0 dB

22_5_DB = Specifies a length of negative 22.5 dB

Default value: 0_133

line_coding

Specifies a value defining the type of line encoding to use for the port.

Valid values are:

B8ZS = Selects Bipolar 8-Zero Suppression (B8ZS)

JBZS = Selects Jammed Bit Zero Suppression (JBZS)

ZBTSI = Selects Zero Byte Time Slot Interchange (ZBTSI)

AMI = Selects Alternate Mark Inversion (AMI)

Default value: B8ZS

line_type

Specifies a value defining the type of framing to use for the port. Valid values are:

D4 = Selects AT&T D4 framing format

ESF = Selects Extended Super Frame (ESF)

Default value: ESF

max_did_digits

Specifies a value that defines the maximum number of DID digits to expect before

accepting an incoming call. Valid values are:

0 = Disables waiting for DID digits

1 - 63 = Specifies the number of digits - use a number in this range for all

countries except Japan.

1 - 4 = Specifies the number of digits for Japan only

Range: 0 through 63 for all except Japan; 0 through 4 for Japan

Default value: 0

Note: The system only reports the expected number of DID digits (the value specified

for max_did_digits) to the application even if the number of DID digits it received from

the network exceeds the number specified for max_did_digits.

protocol_file

Specifies the name of the T1 robbed-bit signaling (RBS) protocol file to load for the

port. This parameter dictates the protocol that runs on the port. Valid values are:

immediatedial.lec

winkstart.lec

Default value: None

1 2 ... 71 72 73 74 75 76 77 78 79 80 81 ... 94 95

Commentaires sur ces manuels

Pas de commentaire

Dialogic Brooktrout TR1034 BRI Guide de l'utilisateur Page 76

Commentaires sur ces manuels

Produits connexes et manuels pour Mise en réseau Dialogic Brooktrout TR1034 BRI